9
3.4.5 Traction Operation
（一）
How to traction goods
First slowly move the tractor to the cargo which needs to be towed ,Pull puller pin with Pull
rod ,Put the connecting frame under the traction pin ,Then put down the traction pin ,And make sure
that the traction pin has fixed the connecting frame on the traction seat before driving .
（二）
How to leave the goods
When The hauling operation finished .Just pull the pull bar on the car and the pull pin will detach
from the cargo automatically
3.5 Safety operation regulation
3.5.1.Requirement for operator:
The Tractor must be operated by a trained operator, He can
perform and operation demonstration on the user to move and manipulate the cargo, and can clearly
guide the user how to operate the forklift.
3.5.2 Operator’s rights, obligations and responsibilities
：
Has been trained by the operation of
the vehicle, the driver must be clear of his rights and obligations; and he is familiar with the contents
of the relevant operating instructions. If the vehicle is pedestrian type, the driver must also wear
safety boots.
3.5.3 Prohibit unauthorized person to operate
：
The operator is responsible for the vehicle, he
need to prohibit unauthorized person to operate. Transport or lift person is also forbidden.
3.5.4 Malfunctions and defects
：
If the vehicle has any malfunctions or defects, need to inform
administrator, If the vehicle cannot be safely operated (e.g.: wheel wear or brake failure), then it
must stop using until it is fully repaired.
3.5.5 Safe operation and environmental protection
：
inspection and maintenance must be
performed in accordance with the time intervals on the maintenance list.
Parts of the vehicle cannot be changed without any permission, especially safety devices. The
operating speed of the vehicle is not allowed to change.
All original spare parts have been verified by quality assurance department. To ensure the safety
and reliability of the operation of the vehicle must use only the manufacturer's spare parts. The old
