EKKO EK13A, Manual

13 

○

7   When forklift driving turn, should reduce speed, where possible, try not to 

turn. 

○

8   Forklift truck carrying gradeability is 10%, so the uphill slope need to 

understand the situation, when climbing the forklift must accelerator pedal pressed 

down as far as possible, the maximum climbing force can be achieved. 

○

9   Forklift in the process of downhill, loosen the accelerator pedal, in order to 

obtain the reverse braking current, if the reverse current can't control the downhill 

braking speed. Please on the brake pedal at the same time, to ensure safety. 

○

10When stopping driving f, leave the accelerator pedal, right foot on the pedal 

until the forklift stop completely. Put the pallet fork in the lowest position, taut hands 

in the car, press the safety switch, pull out the key.(Note that can't leave without a taut 

hand brake lever forklift). 

3.4.2 The steering wheel Angle adjustment 

According to the individual operating habits, steering wheel angle can be adjusted . 

Adjustment method is as follows: Loosen the left hand of direction column, adjust the 

steering wheel to the right position, then lock regulating handle. 

3.4.3 Accelerator pedal operation 

Determine the vehicle forward or backward. Toggle joystick in place, right foot will 

tread the foot pedal accelerator to make the vehicle slowly forward or backward. 

Continue down the pedal, the vehicle's speed to speed up. Started never put foot 

accelerator jammed on to the end, in order to avoid the vehicle out of control.   

3.4.4 Brake pedal operation   

When the vehicles need parking in moving , loosening the foot accelerator, Will move 

to the right foot on the brake pedal in the middle to depress and the vehicle will stop 

after . 

3.4.5The using of emergency power safety switch