EKKO EK13A, Manual

17 

3.5.13 with access and working area:

 The vehicle must be operated on the specified 

channel, all the non-related personnel must leave the work area, and cargo should be 

stacked in designated places. 

3.5.14 Operations Management:

 traveling speed must be adapted to local 

conditions. When through the corners, narrow passage, swing doors and closed place, 

the vehicle must slow down. Drivers must be able to visually an adequate braking 

distance between the vehicle and the vehicle in front, and he must remain in control of 

his vehicle. Sudden stop (unless urgent needs), rapid U-turn, chased each other in the 

channel is not allowed in not smooth places. It is forbidden to operate while the body 

is lean outside. 

3.5.15 Visibility: 

The driver must look in the direction of travel, to ensure that the 

front situation is clearly visible. When the vehicle is backing up with the carriage of 

goods blocked the line of sight, there is must be a second person walk in front of the 

vehicle to give appropriate guidance and warnings. 

3.5.16 via the ramp:

 Only known ramp was allowed to go through. While the ramp 

should be clean, non-slip, and the vehicle technical specification includes the ramp. 

The goods on the forks must face uphill. It is forbidden to turn back, move diagonally 

or park on the ramp. The driver must slow down when going through the ramp, and 

prepare to brake at any time. 

3.5.17 ground load:

 Remember to check the load pressure of the body weight or 

wheels on the ground does not exceed the capacity of the ground, when the vehicle is 

in operation. 

3.5.18 Vehicle Change:

 any possible changes or modifications for rated load, 

stability or safe operation of the vehicle, must obtain prior written approval from 

origin manufacturers or its successor. After vehicle manufacturer check and approve 

the changes, nameplates, labels and markings of Operation and Maintenance Manual 

must be modified as well. 

IV. Maintenance and Service Manual 

4.1 Repair and maintenance of safety procedures 

Maintenance technician:

 The maintenance and service should only be performed by 

special personnel trained by the manufacturer. After the technician sent by after-sales