35
9 Electric System
Electrical system mainly includes battery, traction motor, pump motor, traction motor
controller and pump motor controller, steering combination switch, multi-way valve block
controller, display instrument, combined control switch, instrument and lighting device, etc
9.1 display
The display has six built-in red liquid crystal displays, which provide the operator with
some easy information about the operation of the vehicle's mechanism.
1. Waiting time indicator 2. Fault alarm indicator 3.Electric quantity mark 4. Speed, electric
quantity and time display 5.Temperature alarm light 6. Hand brake light 7. Seat light
8.Instrument function key 9.Function selection key (Up) 10. Function selection key (Down) 11.
Parameter Adjustment key (Down) 12.Parameter Adjustment button (Up) 13. Exit button 14.
Battery indicator
9.2 The battery
First open the cover of the electric bottle, and then use the lifting equipment to load and
unload the battery. Ensure that the lifting equipment has sufficient load capacity. The lifting
device must be pulled vertically to avoid damage to the battery case. The hook of the lifting
device must be safe and reliable. The hook must not fall on a single cell in the battery pack.
- Press the emergency stop switch and power key switch to the OFF position so that it is in the
cut OFF position.
- Remove the connector of the battery cable.
- Connect lifting device to lifting hole.
- Lift the battery from above and remove it with handling equipment.
