18
Fig:15 Steering diagram
8.6Monitor
Curtis instruments are used to realize auxiliary control functions and provide a
display interface for the driver's truck operating conditions. It is composed of
control circuit, accumulated time counter (liquid crystal display), battery fuel
gauge, fault code display and other display circuits. According to the current
demand of electric trucks, this instrument has a brand new design in the control
circuit and display form, which can provide the driver with intuitive truck status
information, compact structure, beautiful appearance, high degree of
automation, and reliable quality.
Curtis instruments provide operators with some simple information about the
operating conditions of the vehicle mechanism. As shown as below
1.
Parameter adjustment key (turn left)
2.
Speed mode switch key/parameter adjustment key (upward)
3.Parameter adjustment key (turn right)
4. Parameter adjustment key (turn down)
5.Parameter adjustment key (Enter)
6.Turtle speed indicator 7.Parking indicator light
8. Fault indicator 9. Lifting lock indicator
10.Seat switch (interlock) indicator light 11.Battery warning light
8.7 Braking
Braking performance depends on road conditions and the loading
conditions of car
The brake function can be activated in the following ways :
⚫
Move to the
‘
0
’
position through the accelerator (Figure 14) or release
the button, the regenerative braking is activated, and the truck brakes until it
stops.
！
