24
down. Drivers must be able to visually an adequate braking distance between vehicle and the
front vehicle, and he must remain in control of his vehicle. Sudden stop (unless urgent
needs), rapid U-turn, chased each other in the Aisle is not allowed. Do not pry out of the body
to operate the vehicle.
10.4.15 Visibility:
The driver must look attentively at the direction of driving, to ensure the
front situation is clearly visible. When the vehicle is backing off, if the carriage of goods
blocks the line of sight, a second person walk in front of the vehicle to give appropriate
guidance and warnings is necessary.
10.4.16 Pass through the ramp:
Only a known ramp which should be clean, non-slip, and
with the vehicle technical availability was allowed to go through. The goods on the forks
must face uphill. It is forbidden to turn back, move diagonally or park on the ramp. The
operator must slow down when going through the ramp and prepare to brake at any time.
10.4.17 Load capability on ground:
when the vehicle is in operation, make sure the load
pressure of the body weight or wheels on the ground does not exceed the load capacity of the
ground .
10.4.18 Vehicle Change:
Any possible changes or modifications for rated load, stability or
safe operation of the vehicle, must obtain prior written approval from origin manufacturers
or its successor. After vehicle manufacturer check and approve the changes, nameplates,
labels and markings of Operation and Maintenance Manual must be modified as well.