17
If the Magic Remote Control is not functioning properly, initialize it and
then re-register it. To use the
Smart Home ( )
button and
BACK ( )
button on the Magic Remote Control to re-register the Magic Remote
Control, perform the following steps:
1.
Hold down the
Smart Home ( )
button and
BACK ( )
button
on the Magic Remote Control for 5 seconds to initialize the
Magic Remote Control.
2.
Aim the Magic Remote Control at your Smart TV, and then press
the
Wheel (OK)
button. A message appears after the Magic
Remote Control is registered.
Note
Aim the Magic Remote Control at your Smart TV, and then
hold down the
BACK ( )
button for 5 seconds to re-register
the Magic Remote Control.
RE-REGISTERING THE MAGIC REMOTE CONTROL
MAGIC REMOTE CONTROL (cont.)