75
SETTING THE TV NAME
Press > > Connection > TV Name
You can use the screen keyboard to set the name for the smart TV to be used on
the network. Up to 25 characters can be entered in case of English alphabet.
NETWORK CONNECTION SETTINGS
Press > > Connection >Network Connection Settings
If you configure settings for the network, you can use various services such as
online contents and applications.
SETTING A WIRED NETWORK
Select Wired Connection (Ethernet). If the router connected to the network
supports the DHCP feature, connecting the TV and router by wire will
automatically connects to the network. If the automatic setup is not supported,
you can select Edit to manually set up the network connection.
SETTING A WIRELESS NETWORK
If you have set the TV up for a wireless network, you can check and connect to
the available wireless Internet networks.
1.
Add a hidden wireless network
2.
If you input the name of network directly, you can add a wireless
network.
Connect via WPS PBC -
If the wireless router you want to connect to has a Wi-Fi
Protected Setup-Push Button Configuration (WPS-PBC) feature, you can easily
connect to the wireless router by pressing the WPS-PBC button on the router.
1.
Press the wireless router’s WPS-PBC button and then go into Network
Settings > Wireless Network > Select “Connect via WPS BPC”, and it
should automatically connect.
Connect via WPS PIN -
This is a method to connect to an access point using a
Wi-Fi Protected Setup-Personal Identification Number (WPS-PIN).
1.
Select the access point you want to connect to.
2.
Enter the PIN displayed on the access point’s Wi-Fi device.
Advanced Wi-Fi Settings -
Once you connect to a wireless network, you can
view connection information such as detailed IP address information. In addition,
you can change the IP address and DNS server address you want to connect to
by pressing the Edit button.
-
The IPv6 setup does not support Edit.
-
For more information on how to connect to the network, see Getting
Started with webOS TV > Connecting to the Network in User Guide.
SETTINGS - CONNECTION
