28
LIVE PLAYBACK
Using Live Playback (Real-time Playback)
It is a function you can use to temporarily save the programme you are currently
watching to a USB HDD, so you can play back any scenes you might miss while
watching TV. This function allows you to continue watching from where you were
previously if you go out for a while.
1.
Input the USB HDD in the USB port.
2.
Press the (OK) button which is located in middle of the
direction arrows.
3.
Press the Start Live Playback button at the bottom of the screen.
4.
During watch the live broadcast, select a point on the progress bar which
you want by the pointer. You can also press the
LEFT/RIGHT
buttons on
your remote control to use this feature.
Select a previous point than the current point on the progress bar
-
The Live Playback function can be used only for broadcast programmes
you view through the antenna input terminal. However, you cannot use
this option while listening to a radio programme.
-
Select a device to be used with Live Playback when two or more USB
HDDs are connected to the TV.
-
You cannot use a USB stick. Connect a USB HDD with 80 GB or more of
total storage.
-
If there is not enough remaining space in the USB HDD device, Live Play
back may not work properly. To use Live Playback function, you need the
USB HDD which has at least 2.3 GB.
-
With the Live Playback function, you can play a programme back for up
to two hours depending on remaining USB HDD capacity. This time may
vary depending on your region.
-
The videos saved in Live Playback mode are deleted if you turn off the
TV without recording them.
-
Changing between programmes during Live Playback will delete the
data of the previous programme.
-
Some models may not be supported.
ENJOY LIVE TV (Cont.)
