Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, Maintenance and Periodic Inspections
Manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
13
5.
Place a lock washer on the middle lever, screw in a crown nut and
secure it with a pin.
6.
Free the rudder pedal.
Pic. 8-11. Adjustment point of rudder push-pull rod movement limiters
(armrest removed from the channel)
7.
Identification of rudder deflection (front wheel does not touch the
ground).
8.
Loosen the limiter bolts.
9.
Deflect the rudder to the left to the full possible deflection.
10.
Push the front limiter to the retaining plate and clamp the limiter on
the push rod by means of tightening the clamp bolt.
11.
Deflect the rudder to the right and set the position of the rear limiter
similarly to point 3.
Push-pull
rod
movement
limiters
Rudder
push-pull
rod
Bumper
plate
