Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, maintenance and periodic inspections
manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
180
−
Installation of the surge tank
o
Put the clamping ring on the tank J.15.250.10.00
o
Fix the clamp and the tank with bolts M5x15 DIN 912,
washers
Ø
5 DIN 9021 and nuts M5 DIN982
o
Connect the hose J.15.500.09.00 to the tank stub pipe
and secure with the clamp W1 13-15
o
Fill the coolant to the required level, according to the
operation Manual of Rorax Engine
6. Hoses of the engine cooling system
−
Positions of hoses of the cooling system mounted on the engine
are defined by relevant drawings, as it is shown on the cooling
system diagram
−
Drain the system every time replacement on any cooling system
element is required
−
Replacement of the rubber hoses is to be performed in the
following way: loosen the steel clamps, remove the old hose,
install the new hose and tighten the clamps.
