DK50 3x4VR/M
NP-DK50-3x4VRM_ED-EN-2_10-2018
- 6 -
10/2018
Wear hearing protection when starting the
product, during operation and any time it is
in operation.
Operating the product in operating
premises that may contain mixtures of
flammable gases such as operating rooms
or in areas that may contain mixtures of
particulate, such as coal dust, is prohibited.
Flammable materials pose an explosion
hazard. Use of the product in wet or damp
environments is prohibited.
The user shall inform the supplier
immediately if any problem occurs in direct
connection with the operation of the
equipment.
3.3.
Electricalsystemsafetywarnings
The equipment may only be connected to a
properly installed socket connected to earth
(grounded).
Before the product is plugged in, make
sure that the mains voltage and frequency
stated on the product are the same as the
power mains.
Check for possible damage to the product
and the connected air distribution system
before use. Replace damaged pneumatic
and electrical conductors immediately.
Immediately disconnect the product from
the mains in hazardous situations or when
a technical malfunction occurs.
During repairs and maintenance, ensure
that:
-
product is disconnected from the
mains
-
pressure is released from all lines
Only the manufacturer, or a qualified
specialist trained by the manufacturer may
install, modify or upgrade the product itself.
Only a qualified electrician may install
electrical
components.
