DK50 3x4VR/M
10/2018
NP-DK50-3x4VRM_ED-EN-2_10-2018
- 7-
4. WARNINGS AND SYMBOLS
The following labels and symbols are used in
the user manual and on the equipment and its
packaging to indicate important details and
information:
Information, instructions and
cautions for the prevention
of damage to health or
materials.
Caution! Dangerous electric
voltage.
Read the user manual
CE mark of compliance
Compressor is remote-
controlled and may start
without warning.
Warning! Hot surface.
Earth (ground) connection
Terminal for ground
connection
Fuse
Alternating current
Handling mark on package –
FRAGILE
Handling mark on package –
THIS WAY UP
Handling mark on package –
DO NOT EXPOSE TO RAIN
Handling mark on package –
TEMPERATURE RANGE
Handling mark on package –
LIMITED STACKING
Mark on package –
RECYCLABLE MATERIAL
5. STORAGE AND TRANSPORT
The compressor is shipped from the factory in
transport packaging. This protects the
equipment from damage during transport.
The
original
compressor
packaging must be used for
transport whenever possible. The
compressor is shipped in a
vertical position and must be
secured using transport straps.
Protect the compressor from humid
and dirty environments and extreme
temperatures during transport and
storage. A compressor in its original
packaging can be stored in a warm,
dry and dust-free area. Do not store
near any chemical substances.
Keep packaging material if possible.
If not, please dispose of the
packaging
material
in
an
environmentally friendly way and
recycle
if
possible.
The
transportation
carton
can
be
recycled with paper.
The
compressor
must
be
transported only when all air has
been vented. Before moving or
transporting the compressor,
release all the air pressure from
the tank and hoses and drain the
condensed water.
Ambient conditions for storage and
transport
Products may only be stored and transported
in vehicles that are free of any traces of
volatile chemicals under the following
conditions:
Temperature:
+0°C to +50°C,
Max. relative humidity:
90%,
