DK50 4VR/50
04/2018
- 19 -
NP-DK50 4VR50-11_04-2018
7
8
9
10
5
16
10
3
11
12
14
1
1
1
1
2
7
8
9
5
16
18
19
20
6
6
3
11
12
14
1
1
1
1
2
DK50 4VR/50/M
(NDM)
DK50 4VR/50/M
(MD)
12.
FIRST OPERATION
Make sure that all stabilizers used during transport were removed.
Check that all pressurized air line connections are secure.
Connect to the mains.
Start compressor at pressure switch (2) by turning switch (3) to position “I.“(Fig.9)
For cabinet-mounted compressors, turn the switch (26) in Fig. 4 on the front side of the equipment cabinet
into the "I" position; a lighted switch indicates the equipment is in operation.
Compressor
- At first operation the air tank is pressurized until it reaches a preset level when the
compressor automatically switches off. As the air is used, the compressor works in automatic mode,
switched on or off by the pressure switch.
Compressor with dryer
– Compressor operation is the same and the moisture from the compressed air is
removed as it passes through the dryer.
For NDM - the condensate is also blown out of the drain on the dryer, which can be heard as a brief whoosh
sound when the compressor shuts down or when the drying chambers switch.
The compressor is not equipped with an emergency power supply.
Summary of Contents for DK50 4VR/50
Page 1: ......
Page 10: ...DK50 4VR 50 NP DK50 4VR50 11_04 2018 10 04 2018 Fig 3 Compressor with adsorption dryer NDM...
Page 11: ...DK50 4VR 50 04 2018 11 NP DK50 4VR50 11_04 2018 Fig 4 Cabinet...
Page 27: ...DK50 4VR 50 NP DK50 4VR50 11_04 2018 130 04 2018 NP DK50 4VR50 11_04 2018 112000123 000...
