EKOM DK50 4VR/50, Installation, Operation And Maintenance Manual

   
DK50 4VR/50 

04/2018 

- 3 -   

NP-DK50 4VR50-11_04-2018 

IMPORTANT INFORMATION  

1. 

CE  MARKING 

Products labeled with the CE mark of compliance

meet the safety guidelines (93/42/EEC) of the European 

Union. 
 

2. 

WARNINGS 

2.1. 

 General warnings 



  This Installation, Operation and Maintenance Manual is a part of the appliance and must be kept with the 

compressor.  Careful review of this manual will provide the information necessary for correct operation of the 
appliance.  



  The  safety  of  operating  personnel  and  trouble-free  operation  of  the  appliance  are  guaranteed  only  if 

original parts are used.  Only accessories and parts mentioned in the technical documentation or expressly 
approved by the manufacturer can be used.  



  If any other accessories or consumable materials are used, the manufacturer cannot be held responsible 

for the safe operation of the appliance.  This guarantee does not cover damages originating from the use of 
accessories or consumable material other than those specified or suggested by the manufacturer. 



  The manufacturer guarantees the safety, reliability and function of the appliance only if:  

- Installation, new settings, amendments, extensions and repairs are performed by the manufacturer or   
  its representative, or a service provider authorized by the manufacturer  
   - The appliance is used in accordance with this Installation, Operation and Maintenance Manual  



  The manufacturer reserves all rights for the protection of its wiring diagrams, methods and names. 



  Translation  of  Manual  for  Installation,  Operation  and  Maintenance  is  carried  out  in  accordance  with  the 

best knowledge. In the case of ambiguities, the Slovak version of the text prevails.

 
2.2. 

General safety warnings 

The manufacturer developed and designed the equipment in such a way so that any risks were excluded if it 
is  used  according  to  intention.  The  manufacturer  considers  it  to  be  its  obligation  to  describe  the  following 
safety measures in order to exclude residual damages.   



  Operation of the appliance must be in compliance with all local codes and regulations. 



  Original  packaging  should  be  kept  for  the  return  of  the  appliance.    Only  the  original  packaging  ensures 

protection of the appliance during transport.  If it is necessary to return the appliance during the guarantee 
period, the manufacturer is not liable for damages caused by improper packaging.  



  Each time the appliance is used, the operator must make sure that it is functioning correctly and safely. 



  The user must fully understand the operation of the appliance. 



  The product is not intended for operation in areas with a risk of explosion.



  If any problem occurs during use of the appliance, the user must inform his supplier immediately.

 
2.3. 

Electrical system safety warnings 



  The appliance must be connected to earth (grounded). 



  Before the appliance is plugged in, make sure that the mains voltage and mains frequency stated on the 

appliance are the same as the power mains.  



  Prior  to  putting  into  operation  it  is  necessary  to  check  for  possible  damage  of  the  equipment  and 

connected  air  and  electric  distributions.  Damaged  pneumatic  and  electric  lines  must  be  immediately 
replaced.   



  Immediately disconnect the appliance from the mains (pull out mains plug) if a technical failure occurs.  



  During repairs and maintenance, ensure that:  

      - The mains plug is pulled out from the socket 
      - Pressure pipes are vented and pressure is released from the air tank.  



  The appliance must be installed by an approved, qualified technician.