DK50 9x4VRT/M
NP-DK50-9x4VRTM_ED-EN-2_10-2018
- 14 -
10/2018
9. EQUIPMENT FUNCTION
The compressor produces oil-free, dry,
filtered compressed air to power pneumatic
devices and equipment used in dental clinics
and laboratories, hospital departments and
more.
Compressor air pumps (11) draw in
atmospheric air through the inlet filters and
compress it through check valves and into the
compressed air system. From there, the
compressed air proceeds to the cooler (8), in
which the compressed air is cooled for the first
time and condensate is produced. The air
then passes through a water separator and
into the condensing dryer (9). This continues
to lower the temperature of the air and
produces more condensate. The temperature
then rises to reduce the relative humidity. The
clean, dry air then passes through a check
valve and enters the air tank (2). Condensate
from the water separator and the dryer is
drained off into a 10 l vessel in the
condensate drain kit. The dryer ensures the
continuous and no-loss drying of the
compressed air. The treated compressed air
is then ready for additional use in the air tank.
Fig.
2 Equipment function
1. Compressor module
2. Air tank
3. Switchboard
4. Safety valve
5. Pressure sensor
6. Pressure gauge
7. Outlet valve
8. Cooler
9. Condensation dryer
10. Water separator
11. Compressor air pump
12. Drain valve
13. Connecting hoses
14. Electric cables
Summary of Contents for DK50 9x4VRT/M
