ASSEMBLY INSTRUCTION
OF THE RAFF-I FAÇADE BLINDS
ASSEMBLY OF THE GUIDE ON THE SIDE
Drill mounting holes on the side of the guide in the numbers
shown below, depending on the length of the guide.
With the guide bar length:
≤ 150 cm: 2 fixings on the FS
≤ 250 cm: 3 fixings on the FS
> 250 cm: 5 fixings on the FS
> 300 cm: 7 fixings on the FS
Attach the MONOBLOK EKOOKNA
Aluminum guide to the side of the façade or other surface
using assembly screws (not included in the set). Plug from
the front with the enclosed aluminum profile.
Ø
10
Ø
5
FRONT GUIDE MOUNTING
Drill mounting holes in the guide from the front in the
numbers shown below, depending on the length of the
guide.
With the guide bar length:
≤ 150 cm: 2 fixings on the FS
≤ 250 cm: 3 fixings on the FS
> 250 cm: 5 fixings on the FS
> 300 cm: 7 fixings on the FS
Mount the MONOBLOK EKOOKNA
Aluminum guide on the façade or window frame using
assembly screws (not included). Plug from the front with
the enclosed aluminum profile.
Ø
10
Ø
5
