Stressless
¤
Jazz / Blues Assembly: Step 1 - Height adjustment on chair
a. Place the chair so that it rests on the footstool with the base up.
b. Unzip the cover underneath the base and pull aside.
c. Loosen and remove the four screws from the base. The base and height disks are now separated from the chair (1).
d. Lift the base off the chair, and remove the height-disks.
e. To add rings, place two of the screws through the base in diagonal holes (2).
f. Place desired number of height-disks on the screws. The metal edge (3) on top of the height-disks must be turned
away from the base.
g. Keep heigh-disks in place while the base is lifted over the chair, while aligning screws in the steel plate (4) on the
chair frame.
h. Place the remaining two screws in place.
i. Tighten screws and zip the cover back on.
Stressless
¤
Jazz / Blues Assembly: Step 2 - Height adjustment on ottoman
a. Please see the assembly instructions for the chair.
Stressless
¤
Jazz / Blues Parts List
Assembly and Parts
