Pellet burner GP xx sc 36
Regular cleaning of the burner’s modules and components ensures it’s reliable
and economic operation for long time.
6.11. SAFETY AND UNPREDICTED RISKS.
RISKS RELATED WITH THE USAGE OF A PELLET BURNER FROM SERIES „GP XX
SC”.
The automated pellet burner from series “GP xx sc” is designed and manufactured in
compliance with the main safety requirements of the acting European standards and
provisions. Dangerous conditions might occur in the following situations:
The automated pellet burner from series „GP xx sc” has been used incorrectly;
The pellet burner has been installed by unqualified staff;
The guides for safe usage, presented in this manual book, have not been observed.
UNPREDICTED RISKS.
The automated pellet burner from series „GP xx sc” is designed and manufactured in
compliance with the acting safety standards. Although all possible risky situations are
preliminary considered, resulting from incorrect operation, the following risks might occur:
Risk from burning, caused by high temperatures from the burning process in the
combustion chamber;
Risk from electrical shock by indirect contact. The pellet burner is connected to the
power supply network and the controlling modules are positioned in specially
designed section, all equipped with the necessary components for overload and short
circuit protection. The ground connection of the burner is mandatory and must be
performed by an authorized technician. Opening of the protection cover panel of the
burner by unauthorized staff is forbidden;
Risk from fingers injuries during maintenance and cleaning. It is recommended to use
proper individual protection equipment;
Risk from strangulation in case of insufficient chimney draught to the consuming
appliance, to which the burner from series „GP xx sc” is mounted or bad sealing of
the flue extraction tract.
6.12. COMPLETION OF THE BURNER’S WARRANTY CARD.
The attached WARRANTY CARD must be completed by filling the required
information in its fields, as the signature and stamp fields must be completed too,
in order to ensure the WARRANTY CARD VALIDITY of the pellet burner from
series „GP xx sc”.
6.13. ACTIONS AFTER EXPIRY OF THE LIFE CYCLE OF A PELLET BURNER FROM
SERIES „GP XX SC”.
After expiry of the product’s life cycle, its termination must be environmentally friendly and
protective. For that purpose the burner has to be disassembled and its modules and
components have to be delivered to waste disposal offices, by observing the principles for
separate collection of wastes.
