Pellet burner GP xx sc 7
3. TECHNICAL DATA OF THE PELLET BURNER FROM SERIES „GP XX SC”.
The technical data of the automated pellet burner from series „GP xx sc”, operating with
wood pellets, is presented in Table 3.1.
Table 3.1. Technical parameters of the automated pellet burner from series „GP xx sc”,
operating with wood pellets.
PARAMETER
DIMENSION
VALUE
Burner model
-
GP 20_18 sc
GP 25 sc
GP 32 sc
Nominal heating output
kW
18
25
32
Heating output adjustment range
kW
7-18
7-25
10-32
Used fuel
-
Wood pellets
Wood pellets classes according to
standard EN ISO 17225-2:2014
-
A1, A2 and B
Used pellets categories (according to
the manufacture company’s
classification)
-
A, AB, B, BC and C
Wastes after complete fuel burning
Ash
The quantity depends on the pellets ash
content and on the burner’s operation
mode
The automated pellet burner from series „GP xx sc” is designated for utilization of
wood pellets complying with the classification of standard EN ISO 17225-2:2014,
classes A1, A2 and B, and also with the developed classification by the
manufacture company.
The dimensions and technical parameters of the automated pellet burner from series „GP xx
sc” are presented in Table 3.2.
Table 3.2. Dimensions and technical parameters of an automated pellet burner from series
„GP xx sc”.
PARAMETER
DIMENSION
VALUE
Model
-
GP 20_18 sc
GP 25 sc
GP 32 sc
Weight
Main module
kg
20
20
20
Fuel feeding
auger
kg
8.5
8.5
8.5
Overall
dimensions
(WхLхH)
Main module
mm
250х705х488
Fuel feeding
auger
mm
184x1520x107
Power supply voltage
-
L1, N, PE, 50Hz; 230VAC;
Electrical
consumption
In nominal
mode
A
0.2
0.2
0.2
In ignition
mode
A
4.5
4.5
4.5
Electrical power
W
<100
+1100
(with ignition)
Electrical protection
-
IP20
