EKOVENT AB
We reserve the right to make changes
2022-03
10
Installation- and maintenance instructions
Maintenance
•
Check and correct any visible damage.
•
Check that the hood is properly at-
tached in the Roof inlet and that any
stay lines are whole and taut.
•
Check that the hood’s wire mesh is
secure mounted and have no visible
damages.
•
Remove any accumulation of leaves,
dirt or snow.
•
Make sure that no object obstructs the
air flow.
•
Inspect the drainage holes in the Roof
hood that no dirt or leaves obstruct
the water from running out of the
hood.
Cleaning
•
The requirement for cleaning cor-
responds to the requirements which
is placed on the facility in general and
the applicable product warranty.
•
Do not clean the hood with a high-
pressure cleaner.
