10
In this output parameter selection section there also appears information on the bit rate of
each one of the mux outputs:
As shown above the overall bit rate of the output is displayed. The maximum carried is 100
Mbps.
3.2.2 Saving and loading a configuration
The "CM management" software enables saving on the PC the transmodulator for subsequently
uploading to another CM 4HD-IP module. Its running is carried out using the following two
buttons, available in the vertical menu on the right:
Save
on the PC a programming configuration of a module to be subsequently
loaded. A .dtc format file will be created.
Load
a configuration program previously saved on the PC. The configuration
file will have the .dtc extension
It is important to load the CM4HD-IP in a .dtc file previously created with another similar
module. Otherwise, the "CM management" software will display that it is not possible to load it.
3.2.3 Data-logger
The "CM management" software, through the Data-logger option enables one to generate and
save to the PC a report containing the data of the various modules connected to a head core.
To that end, click on the icon
and specify the file name. A document with the
html format which can be opened with a browser, similar to the following will be created.
