5
3. Software Programming: CM management
The "CM management" programming software enables the programming and running of all
modules of the CM headend. The program is available only for Windows operating system (XP
version 7 and above).
Once downloaded from the website
www.ekselansbyits.com
, Documentation >> Software
section, having previously run the program with the PC connected to the USB port of the FA 524
power supply. In this fashion, it is ensured that the driver detects the core.
3.1.Main screen
The main screen of the "CM Management" software is as follows:
Through this function one can run and program all modules connected to the power supply.
Explained below is the function of each of the options:
