7
Each module is identified by means of a series of different coloured boxes. Depending on
the module, this will be represented by 2, 3 or 4 boxes where the green represents the inputs,
the blue the output and the orange the Common Interface slots.
3.2. Programming of the CM 4HD-IP module
Once the CM 4HD-IP module is connected to the FA 524 power supply, this in turn to the PC and
the "CM management" programme open, select the CM 4HD-IP which is represented as follows:
Select the upper green box, the programming interface of the first two HDMI inputs will
appear as is shown below:
HDMI 1, 2 3 and 4 Inputs
IP Output
Power supply and head operator
Identification of a module with 2 twin inputs
(Quad module) in green and Quad output in blue
Identification of a module with 1 twin input
(Quad module) in green, 2 slots Common
Interface in orange and Quad output in blue
Identification of module with 1 block of 4
HDMI inputs in green and IP output in blue
