ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
19
USER MANUAL
EK CAST
Https Configuration.
This menu allows to enable or disable the HTTPS protocol to access the EK CAST web front-end. When
HTTPS is enabled the connection to the EK CAST will be done in a secure way.
1.
Https Disabled: if it is selected, HTTPS is disabled, and no additional configuration is required.
2.
Signed certificate: if it is selected, a private key file and a certificate file must be selected in order
to HTTPS works properly.
3.
Certificate signed with Letsencrypt: if it is selected, a Letsencrypt certificate
(
) will be generated pressing the Generate Certificate button; a
management email must be provided in order to generate the Letsencrypt certificate.
When Signed certificate or Certificate signed with Letsencrypt are selected, it is needed to set two
NAT entries for port 443 and port 80 in the router which provides Internet connection in order to
have remote access to the EK CAST through both ports.
Once configured all the parameters, press Save button to apply the changes.