6
www.eksmaoptics.com
Table 4.
Controls and connections of the HV power supply
#
Port
1.1
2 pins for +24V input
1.2
2 pins for GND input (-24V)
2
LED HV output on
3
LED +24V
4
Potentiometer for HV tuning in potentiometer control mode
5
CAN connector
6
Control connector
6.1
“-Ih” test point for -HV current (1V = 100mA)
6.2
“GND”
6.3
“OUT” indication point for HV output (HV off - +5V; HV on- 0V)
6.4
“OFF” control input to enable HV output (connect to GND to allow HV output)
6.5
“Uhv” test point for +HV output (1V = 1kV)
6.6
“+Ih” test point for +HV current (1V = 100mA)
7
CAN terminator
8
+HV output
9
GND output
10
-HV output (+HV output for HV-170)
11
Grounding screw