EN
7
Recycle discarded product as
electrical waste.
TECHNICAL DATA
Input voltage, transformer
230 V ~ 50 Hz
Output voltage, transformer
4.5 V
Output
1.35 W
Safety class
II
DESCRIPTION
1. Top star with mount
2. Aeroplane
3. Flag
4. Steel wire
5. Transformer
FIG. 1
ASSEMBLY
1. Fasten the flag to the aeroplane.
FIG. 2
2. Fasten the top star to the tree.
FIG. 3
3. Fasten the steel wire to the top star.
4. Fasten the aeroplane to the steel wire.
5. Connect the transformer to the mains.
FIG. 4
HOW TO USE
1. Connect the transformer to the mains.
2. Start the product by putting the switch in
the ON position.
3. Switch off the product by putting the
switch in the OFF position.
SAFETY INSTRUCTIONS
• Do not connect the product to a power
point while the product is still in the pack.
• Only intended to be used indoors.
• Check that no light sources are damaged.
• Do not connect two or more string lights
together electrically.
• No parts of the product can be replaced,
or repaired.
The whole product must be discarded if
any part is damaged.
• Do not use sharp or pointed objects
during assembly.
• Do not subject the power cord or wires to
mechanical stress. Do not hang any
objects on the product.
• This is not a toy. Be careful if using the
product near children.
• Disconnect the transformer from the
power point when the product is not in
use.
• This product must only be used together
with the supplied transformer and must
never be connected directly to the mains
supply without a transformer.
• The product is not intended to be used as
general lighting.
• Recycle products that have reached the
end of their useful life according to local
regulations.
WARNING!
The string of lights may only be used if all
seals are fitted correctly.
SYMBOLS
Safety class II.
Only intended to be used
indoors.
Approved as per applicable
directives.
Summary of Contents for 021661
Page 3: ...1 1 2 3 4 5 4 2 3 ...
