- 5 -
OPTION 2
The assembly can be mounted on any flat surface inside your
computer chassis. You should drill four (4) 4.2mm holes using a
power drill in a 50x50mm square pattern.
Please follow these steps:
1. Screw on Vibration Dampers on Custom SPC Screws;
2. Drill four (4) 4.2mm holes into the chassis;
3. Use the enclosed M4×4mm screws to secure the pump to the chassis.
INSTALLING THE ASSEMBLY
50
mm
50mm
Φ
4,20
Vibration damper
Screw M4x4 DIN7984
