- 10 -
STEP 3b
STEP 3a
STEP 3
Secure power cable with mounting it into included inox power
adapter.
STEP 3a
Stick the two included plastics pads (M3) on to inox power addapter
as shown on picture.
STEP 3b
Insert 8-pin power connector in to the inox adapter. Pads on the
power adapter must be alligned with openings in inox power
adapter.
Pay attention to the orietation of the latch on connector.
For this Step, you will need:
M3x6
SCREW
Screw M3x6 DIN 7991
(2x) 9029
Allen Key 2mm
(1x) 8901
STEP 3c
STEP 3c
Fasten a inox power adaptor to the water block with two (2) M3x6
screws. When power cables is installed there is needed a litlle bend
and twist of power cables in order to atteched power adaptor to
water block.
