ELAC Adante Speakers | www.elac.com | Page 4
Installing and Removing the Magnetically Attached Grills
The mesh grills of your Adante speakers are designed to be removable if desired. To remove it, hold the top or
bottom edges of the grill and pull gently. To replace the grill, place the grill in the normal position on the cabinet
and the magnets will hold the grill in place.
Speaker Connections
The Adante speakers are designed to use conventional wiring as well as Bi-Amping or Bi-Wiring. For
conventional wiring leave the metal jumpers in place and connect the + (Red) and Black (-) connectors on your
amplifier to the + (Red) and Black (-) connectors on the speakers as shown in Fig 1 . For Bi-Amping remove the
metal jumpers and follow the diagram on Fig 2. For Bi-Wiring remove the metal jumbers and follow the diagram
in Fig 3.
Amplifier
Fig. 1—Single WIring
Fig. 2—Bi-Amping
Low Frequency Amplifier
High Frequency Amplifier
Amplifier
Fig. 3—Bi-Wiring
Summary of Contents for Adante AC-61
Page 15: ...1...
Page 16: ...2...
Page 17: ...3 5 bis zu 7 5 m...
Page 19: ...5 ACHTUNG nur AF 61...
