Bi-Wiring/Bi-Amping operation
input midrange/treble
jumper
input woofer
Some of our speakers allow separate operation of the treble/midrange and the woofer by means of two amplifiers (Bi
Amping) or by means of separate connecting cables (Bi Wiring). For this purpose, the speakers are provided with
double terminals. The two pairs of connecting jacks that are provided with jumpers were designed for standard opera-
tion (with one amplifier). For Bi Wiring/Bi Amping, the jumpers must be removed. The passive crossover networks of
the individual drivers remain in operation. This way, the use of special filter crossover networks is not required.
Bi-Wiring
One pair of connecting jacks is used for the
connection to the network of the
midrange/tweeter. The other pair is used for the
connection to the network of the woofer. Due to
separate wiring (Bi Wiring), a decoupling of the
two legs is obtained. This reduces cross-talking
between the midrange/tweeter leg and the
woofer leg.
There are different types of connecting cables
that can be used. For example, low-inductance
cables are suitable for the treble area and
particularly large cables are suitable for the
woofer area.
Connecting the speakers to a stereo system
23
