Controls and Indicators
1.
RCA Input — This connection is used to connect the speaker to your pre-amp/AV receiver with RCA
connections
2.
XLR Inputs —This connection is used when your pre-amplifier features XLR balanced outputs.
3.
Input Switch— Allows for selection of the RCA, XLR, or Wireless Input
4.
Left/Right Switch— This switch determines if the speaker is the left of right speaker when the wireless
input is being used.
5.
LF EQ Switch—This switch allows you to tailor the low
frequency output to your liking. (See page 8 for
more details)
6.
MF EQ Switch—This switch allows you to tailor the mid-
range output to your liking. (See page 8 for
more details)
7.
HF EQ Switch—This switch allows you to tailor the high-
frequency output to your liking. (See page 8 for
more details)
8.
HP Filter — This switch applies a High Pass filter to the
speaker. This would be used in conjunction with
a subwoofer. (See page 8 for more details)
9.
Gain Adjustment—This switch allows you to adjust the input
left gain of the speaker. (See page 8 for
more details)
10.
AC Inlet — This inlet is a standard IEC power jack. Use the
supplied power cord to connect the speaker
to an available AC outlet.
11.
Primary Power Switch—This switch is used to turn on/off
primary power to the speaker
12.
Pair Button —This button is used when pairing the speakers
with an AirX² transmitter
13.
Wireless LED—The light is used during the pairing process
with an AirX² transmitter
14.
Voltage Selector—This switch is used for selecting the
correct AC Voltage for your country.
ELAC Navis Speakers | www.elac.com | Page 4
10
