ELAC Navis Speakers | www.elac.com | Page 5
Installing the base and spikes (AF-51 Only)
Using the included outrigger plate provides a wider support base for the speaker cabinet and should be
installed. The included spikes improve stability on uneven surfaces and thickly carpeted floors. Please use
caution when dealing with the spikes as they are sharp.
IMPORTANT: When using these spikes on hard surfaces such as wood or tile floors be sure to use the provided
floor discs to protect your floor from damage.
1
IMPORTANT: In order to prevent scratching or damage
to the cabinet, turn the speaker upside down onto a soft
surface while you attach the outrigger plate and spikes.
We highly recommend a second person help with this
process. Also, please use caution when picking up and
moving the steel outrigger plate. It is very HEAVY! Do
not leave the speaker upside down
2
Attach the spike mounts and spikes and to the bottom
steel plate as shown in the diagram to the right. Please
be careful when picking on the steel outrigger plate. It
is heavy.
3
Place the steel outrigger plate on the bottom of the
speaker and attach it using the four supplied machine
screws as shown in the diagram to the right. Please
exercise caution. These items are heavy.
4
Now carefully turn the speaker back upright. We
suggest using a second person for this process. Please
be careful of the spikes. They are sharp. Please use the
floor discs if you have hardwood or tile floors.
5
Once the speaker has been moved to the final location,
rotate the spike until the speaker is level.
