ELAD QSF-06
User Manual Rev 1.0 04/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
10
Now it is possible to extract the printed circuit board together with the rear panel like shown in the
picture below.
Once extracted, insert the desired filters in the chosen positions. The filter modules have a polarized
connection, i.e. they cannot be inverted because their connectors have a different number of pin.
Al last, relocate the printed circuit board inside the enclosure and screw in the four screws and the two
standoffs.
