background image

4

3. Safety Information

2. Package Info

•  This device is suitable for professional purposes only. When you receive the light, check if it is broken 

caused by delivery. If it’s broken, contact your local dealer as soon as possible .

•  The IP rate is 54, suitable for indoor and outdoor performance. The devices should be kept dry and 

avoid using it in moist, overheating, dusty environment.

•  To avoid damages caused by electric shock, fire, UV, lamp burst and device falling etc, please read the 

manual thoroughly before charging and installing.

•  Make sure you know all the danger notices and abide by the instructions in this manual for correct 

operation. 

•  For more information, please contact your local dealer.

•  Manual

•  Safety Chain

•  Omega Clamp (x2)

•  DMX Cable 

•  Power Wire

Overheating

Lens Burst Prevention

Mounting Accident Prevention

Fire and Burning Prevention

Included accesories:

Working temperature ≤ 40º

Lens Dimension : ø 156×28 mm

•  Switch off the device immediately once the 

surrounding temperature is over 40℃.

•  Change the lens if there are cracks or dent on it. 

•  Only the original brand lens is suitable to 

change 

•  Do not carry the device alone.

•  Make sure the facility can withstand ten times 

teh weight of the light before hanging.

•  Please make sure the mounting hardware is 

strong enough without any damage, and using 

the safety chain together for secure. Let the 

pulley below the working place when installing 

or removing the device .

•  Do not install the device on flammable material 

surface directly .

•  Do not short circuit the temperature protection 

terminal or fuse. Use the standard fuse .

•  Stay away of the inflammable material .

•  Do not project the light within 12 M and the 

material projected temperature should not be 

over projected range of 3 meters away objects 

and 60℃ 12m.

•  There should not be stuff within 0.5m from the 

fan or ventilation .

•  Do not place anything over the lens .

•  Let the device cool for at least 20minutes before 

package and delivery .

•  Use only approved brand spare parts .

All CAB-330-BEAM-IP lights are packed in 1in1 or 2in1 flight case or carton with accessories inside .

    

Summary of Contents for CAB-330-BEAM-IP



















Reviews: