VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM E L A N H O M E S Y S T E M S
Page 14 © ELAN Home Systems 2007 • All rights reserved.
5
Interface Port
Use this connector when utilizing local control features such as local source
control, local IR receivers, or sense-enabled automated sequences.
IR OUT (LOC)
The IR OUT (LOC) port is typically used to control a device that is not part
of the main IR system, such as a TV or DVD player located within the same
room as the touch panel, or an ELAN Electronic Volume Control. IR is routed
to an emitter or IR distribution block connected to the IR OUT (LOC) in two
ways:
Any IR signal that is received from the Local IR Input is sent out of
the Local IR Output RJ-45 Port, the SYS IR Output RJ-45 Port and
the IR OUT (LOC) port from the Interface Port.
IR signals may be specified in programming as "Local" and be routed
through the Local IR OUT (LOC) port. See VIA!TOOLS "Help" file for
specific information about IR routing.
IR Emitter
IR + = White Stripe
GND = Black
IR OUT (LOC)
IR IN
GROUND
+12 VOL
TS OUT
SENSE
Figure 3.4: Interface Port IR OUT (LOC) Connection
1.
2.
