© ELAN Home Systems 2007 • All rights reserved. Page 15
E L A N H O M E S Y S T E M S VIA!4.0-EM/VIA!7.0-EM/VIA!10.0-EM
IR IN
The Local IR Input is typically used to connect an external IR receiver to the
touch panel. Typical applications include a plasma-friendly IR receiver (ELAN
IRS8EP, for example) placed near a TV, or an auxillary IR receiver placed in
an area more convenient than the location of the touch panel. Any IR signal
that is received from the Local IR Input is sent out the Local IR Output
RJ-45 Port, the System IR Output RJ-45 Port and the IR Out from the
Interface Port.
Connect IR IN, GROUND, and +12 VOLTS as shown in
Figure 3.5
.
+12VDC
G
IR
IRS8EP
Extreme Plasma
IR Sensor
IR OUT (LOC)
IR IN
GROUND
+12 VOL
TS OUT
SENSE
Figure 3.5: Interface Port IR IN Connection
