© ELAN Home Systems 2008 • All rights reserved. Page 49
E L A N H O M E S Y S T E M S
XP8.4
Wireless Color Touch Panel
Battery Information
The XP84 is equipped with an internal Li-Ion battery pack that is capable of
supporting approximately 1.5-2 hours of continuous operation. This period of
continuous operation is extended by approximately 3-4 hours with the exter-
nal battery pack that clips (hot-pluggable) onto the back of the XP84. The
period between battery recharges can be significantly lengthened by putting
the XP84 into
Standby
mode with the Power Button whenever the device is
not in use.
External Battery Pack
To add the external battery pack:
Remove the rubber protective cover from the panel pin location.
•
Place tabs of external battery pack into the slots on the back of the unit and
• push
down where the pins make their contact point clicking the pack into place.
SLOTS
Figure 4-47: External Battery Installation