4
Know Your Blender
1. Lay the motor unit on the flat horizontal surface and make sure it is unplugged.
NOTE: There is a safety interlock device at the bottom of jar, if the jar is
not assembled in place, the blender will not operate.
2. Open the jar cover by turning anticlockwise and place jar on the flat
surface. Peel or core the fruits or vegetables and then cut them into
small pieces, then put them into the jar. Install jar base onto the jar by
turning clockwise, then reverse the whole jar assembly and install it
onto motor unit by turning clockwise. Usually certain amount of purified
water has to be added to facilitate the smooth running of appliance.
The amount of mixture should not exceed the max level as indicated
on the jar, nor sit lower the min level. The best proportion of the fruits or
vegetables and water is 2:3.
3.For blending function:for example:the quantity of pineapple, lemon,
orange(size:15*15*15mm) the best proportion of the fruits and water is 2:3
Food formula:
NOTE: The blender is not applicable for beating egg white, mashing
potatoes, mixing dough, extracting juice from fruit and vegetable.
4. Ensure the Speed Selector to “ 0 ” Position, then plug into power outlet
and set Speed Selector to your desired setting. You can turn the speed
selector to “P” without releasing it if want to accelerate the process of
blending. The detailed information is shown in below fig. 2
Attachment
Food Type
Weight / Spec.
Time
Blender With
Jar
Carrot
Carrots: 240G
Water: 360Ml
1 Minutes
Blender With
Small Jar
Carrot
Carrots: 120G
Water: 180Ml
1 Minutes
Blender With
Jar
Ice Crush
Total Weight
max 50G
Size: 2Cm* 2Cm *2Cm
Temperature -18
Selector “P” Function
(On 2Sec.+Off 2Sec.) X10
Cycle