4
5
1. Speaker
2. Color LED indicator
3. Microphone
4. Charging LED indicator
5. MicroUSB port
6. On/Off button
7. Hole for the cord
Device components and controls
Kit contents: portable speaker, microUSB cable, carrying strap,
user manual.
Charging battery:
1. Connect the speaker to the power supply using the microUSB
cable supplied with the device*. The LED will light.
* Power adapter not included. We recommend using a power
adapter with the following specifications: 5 V, max. 1.0 A, for ex-
ample ELARI PowerPort.
2. When charging concludes the LED will turn off.
Note: If the sound of the music becomes quieter and you hear a
sound notification, charge the speaker.
Device management:
1. Turn on the device: press and hold the “ ” button until you
hear a beep. At the same time, the indicators will flash blue.
2. Open the Bluetooth settings menu on your device and search
for devices.
3. Select “ELARI NanoBeat” from the list of found Bluetooth de-
vices. If the connection is successful you will hear the voice mes-
sage “NanoBeat connected”, and the LED indicators will turn blue.
4. To play music, open the music application on your Bluetooth
device, while the coloured LEDs will continue to flash. To start play/
pause/receive a phone call/stop a phone call, press the button once.
5. Turn off the speakers by pressing the button
“ ” for 2 seconds.
Bluetooth pairing of two NanoBeat speakers for stereo effect:
1. Turn on both speakers, then press the On/Off button twice on
one of them. An audible notification will sound from the speakers,
and the indicator will flash, they will then automatically pair. When
pairing is successful, both speakers will sound an audible notifica-
tion, and the indicators will remain lit.
2. Open the Bluetooth settings menu on your device and search
for devices.
3. Select “ELARI NanoBeat” from the list of Bluetooth devices found.
If the pairing succeeds, an audible notification will sound. At the
same time, the LED of the main speaker will continue to light up.
differ from those shown in the manual as all the illustrations are
based on prototypes.
The company is not responsible for any damage caused as a re-
sult of the use of this device for anything other than its intended
purpose. In order to ensure the continuous improvement of our
products, we reserve the right to make changes to the design, soft-
ware and specifications of the device without prior notice. Current
information is available on the website: www.elari.net.
