1-8 Installing the StormPort 400 Modem
Revision 1.00
StormPort 400 Modem Installation Guide
08-01137-01
Task:
Installing the Inline Filter
If you have other devices connected to the same line as the StormPort 400
Modem, you will need to install one Inline Filter per device.
Follow these instructions precisely to install the Desk Mount Filter. If the
telephone filter is installed incorrectly (reversed), the filter will not allow voice
signals to pass.
To install the Inline filter, simply disconnect the telephone line cord
connecting the other device from the wall jack and insert it into the jack on the
inline filter. Plug the filter’s “pig tail” end into the wall jack.
STOP
You have completed this task.