7
The UI allows the administrator to configure the management Vlan IP addresses.
In case if the user has changed the management Vlan IP address, they need to assign
the corresponding network address to his PC for the management access subsequently.
Alternatively the user can access the device via the static IP 10.0.0.1 and
configure the network settings during first time installation. Connect a PC to the LAN port
of the STM and assign the IP address 10.0.0.100/255.255.255.0 to the PC. Now you can
access the device from the browser using the URL
https ://< 10.0.0.1>
If the device is not accessible after configuring the new network configuration, Try
rebooting the device and check the device dashboard accessing via Management Vlan.
On launching the SIP Firewall WebUI, the web application will prompt to enter the
administrator credentials to login.
Figure 6: Login Page
THE FULL VERSION MANUAL WILL PROVIDE YOU DETAILED INSTRUCTIONS
ABOUT THE FULL FEATURE SET OF THE ELASTIX SIP FIREWALL
Any Technical assistance required, Kindly contact the support at:
support@elastix.com
THANK YOU!
Summary of Contents for SIP Firewall
Page 1: ......
Page 2: ...Elastix SIP Firewall Quick Installation Guide ...