background image

  Event Par System™                                     Specifications

  Model:  Event Par System™

   SPECIFICATIONS:

 

   Lamps: 

 

 

181 LEDs: 36 Red, 85 Green, and         

                                          60 Blue

  Beam Angle: 

 

40 Degrees

  Output Distance:   

45~50m

  Working Position:   

Any safe working position

   Voltage:    

 

90 ~ 240V (Event Panel)

   

 

 

 

12v DC (Battery Pack)

   Power Consumption: 

30W

  Fuse: 

 

 

1 Amp

  Weight:     

 

6.8lbs./ 3.1Kgs. (Event Panel)

    

 

 

 

16.5lbs./ 7.54Kgs. (Battery Pack)

  Dimensions: 

  Event Par:   

 

12.7” (L) x 11” (W) x 3.9” (H)

   

 

 

 

324.5 (L) x 280 (W) x 101 (H) mm

  Battery Pack: 

 

10.6” (L) x 9.1” (W) x 4.8” (H)

   

 

 

 

270 (L) x 233 (W) x 123.5 (H) mm

   Colors: 

 

 

RGB Color Mixing

  DMX Channels:   

1, 2, 3, 4, 5, 6, & 7  

  Warranty:                         2 Year (730 days)

Please Note:

 Specifications and improvements in the design of 

this unit and this manual are subject to change without any prior 
written notice.

©Elation Professional® 

A Division of the AmericanDJ® Group of Companies

World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-3322 Fax: 323-832-9142

Web: www.elationlighting.com  E-mail: info@elationlighting.com

©

Elation

®

  -  www.elationlighting.com  - Event Par System™ User Manual Page 19

Summary of Contents for Event Par System











Reviews: