background image

 Opti Tri 30                                              Safety Precautions

Elation Professional  -  www.elationlighting.com  - Opti Tri 30 Instruction Manual Page 4

Elation Professional  -  www.elationlighting.com  - Opti Tri 30 Instruction Manual Page 3

•   To reduce the risk of electrical shock or fire, do not expose this unit  
   rain or moisture
•   Do not spill water or other liquids  into or on to your unit.
•   Be sure that the local power outlet match that of the required volt- 
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been   
   frayed or broken. Do not attempt to remove or break off the ground 
   prong from the electrical cord. This prong is used to reduce the risk  
   of electrical shock and fire in case of an internal short.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Never plug this unit in to a dimmer pack
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out`  
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to the point they exit from the unit. 
• Cleaning -The fixture should be cleaned only as recommended by  
  t he manufacturer. See page 10 for cleaning details.
•   Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances (inclu-
   d ing amplifiers) that produce heat.
•   The fixture should  be serviced by qualified service personnel when:
    A. The power-supply cord or the plug has been damaged.
    B. Objects have fallen, or liquid has been spilled into the appliance.
    C. The appliance has been exposed to rain or water.
    D. The appliance does not appear to operate normally or exhibits a  
       marked change in performance.

 Opti Tri 30    

                             Warranty Registration

 Opti Tri 30    

 

 

                              Features

To  optimize  the  performance  of  this  product,  please  read  these 
operating  instructions  carefully  to  familiarize  yourself  with  the  basic 
operations  of  this  unit.  These  instructions  contain  important  safety 
information  regarding  the  use  and  maintenance  of  this  unit.  Please 
keep this manual with the unit, for future reference.

 Opti Tri 30    

                               General Instructions

•  Multi-Colors
•   Built in Microphone
•   Five Operating Modes
•   DMX-512 protocol
•   Six DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel  
  Mode, 4 Channel Mode, 6 Channel Mode, & 7 Channel Mode
•  Dimming 0-100% in 2 Channel Mode, 4 Channel Mode, 6 Channel  
  Mode, & 7 Channel Mode.
•  Daisy Chain Units Together in DMX Mode

The Opti Tri 30 carries a two year limited warranty. Please fill out the 
enclosed warranty card to validate your purchase. All returned service 
items  whether  under  warranty  or  not,  must  be  freight  pre-paid  and 
accompany  a  return  authorization  (R.A.)  number.  The  R.A.  number 
must  be  clearly  written  on  the  outside  of  the  return  package.  A  brief 
description  of  the  problem  as  well  as  the  R.A.  number  must  also  be 
written  down  on  a  piece  of  paper  included  in  the  shipping  carton.  If 
the unit is under warranty, you must provide a copy of your proof of 
purchase  invoice.  You  may  obtain  a  R.A.  number  by  contacting  our 
customer  support  team  on  our  customer  support  number.  All  pack-
ages returned to the service department not displaying a R.A. number 
on the outside of the package will be returned to the shipper.

Summary of Contents for Opti Tri 30









Reviews: