4
Ticket_Circus_1.2_ENG
Elaut NV
Provides additional information that is helpful to do a task or to avoid problems.
This is the CE logo, which indicates that the product meets the legal requirements.
The ENEC symbol is an addition to the CE logo relating to electronic products that
are introduced to the European market.
The ENEC symbol is certified by a third party only, independently of the
manufacturer. It indicates that the machine and machine location are safe as
referred
to in the corresponding European directive.
The symbol on the material, the accessories or packaging indicates that this
machine
may not be treated as domestic waste.
WARRANTY
All electrical and mechanical parts of the machine – if used under normal operating – are covered by a one-year
warranty from the original purchase date. Any defective component will be replaced, but our responsibility
restricts itself exclusively to replacing the defective component ex works, with the shipping cost not included.
Any right of indemnity or reimbursement cannot be claimed.
LIABILITY
Elaut NV is not liable for any damages caused by failure to comply with the installation instructions in
accordance with the legislation in your country.
VERSION HISTORY
During the lifetime of the Ticket Circus machine, engineering and/or technical improvements may result in the
need to revise this manual. It is then at the discretion of Elaut NV, if a revision/new version of this manual is
required.
The following table describes the main changes for each document version of this manual.
Version
Date
Changes
1.0
1.1
1.2
1 March 2018
16 January 2019
17 January 2019
Initial version
Update service
Update Layout
