66
A
B
Fig. 10.9
Fig. 10.10
OVEN BURNER AND GRILL BURNER
REPLACEMENT OF INJECTORS
a) oven burner
– Lift and remove the lower panel inside
the oven.
– Unscrew and remove the burner secur-
ing screw “
A” (fig. 10.9).
– Slacken screw “
B” (fig. 10.9).
– Withdraw the burner in the manner
shown in figure 10.10, and rest it in-
side the oven. Take care not to dam-
age the wire to the ignition electrode
and the safety valve probe.
– Using a 10 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 10.10) and replace with a new in-
jector selected in accordance with the
‘Table for the choice of the injectors’;
then replace the burner repeating the
above steps in reverse order.
