background image

 

7.0 TROUBLESHOOTING 

If the laundry is not dried after normal drying program. 

1.  Check that the lint filter has been cleaned. A blocked filter will restrict the airflow. 

2.  If  the  cut-out  continues  to  operate  after  checking  the  above  points,  you  should 

contact the after sales service centre. Do not attempt to repair the unit. 

3.  Check that the appliance has the correct weight load in the drum before starting the 

appliance. 

4.  If your appliance does not work properly, check the following before calling the after 

sales service centre:- 

a)  Check that there is a supply of electricity. 

b)  Check that the door has been properly closed. 

c)  Check the fuse in the moulded plug. 

d)  Check that the lint filter has inserted properly in place. 

e)  Check that the safety cut-out has been operated. Press the reset button at the 

rear of the appliance to reset. 

 
 

Trouble

 

Cause

 

Solution

 

 
 
 

Dryer not able to 

start

 

• 

The power plug is not plug in proper 
way.

 

• 

Dry clothes exceed the capacity.

 

• 

The temperature fuse is cut.

 

• 

Program not selected.

 

• 

Check the power socket, make sure power 

plug insert properly to power socket.

 

• 

Make sure the drying clothes cannot exceed 

9kg.

 

• 

Please contact the service centre to replace 

the temperature fuse.

 

• 

Set the right program.

 

The programme 

has been 

interrupted for no 

reason 

 

 

• 

The door might not be closed properly. 

• 

There might have been a power 
failure.  

• 

The water container might be full.  

 

• 

Make sure that the door is properly closed. 

• 

Press the Start/Pause key to start the 

programme. 

• 

Empty the water container 

Laundry comes out 

damp at the end of 

the drying process.  

 

• 

The programme used might not be 
suitable for the type of laundry.  

• 

The surface of the lint filter might be 
clogged.  

• 

The condenser might be clogged.  

• 

The dryer might be overloaded with 
laundry.  

• 

The laundry might be insufficiently 
spin.  

 

• 

Check the care labels on the laundry items, 

select a suitable programme for the type of 
laundry and additionally, use the time 
programmes. 

• 

Wash the filter with lukewarm water. 

• 

Wash the condenser. 

• 

Do not overload the dryer. 

• 

Select a higher spin speed on your washing 

machine after that put into dryer for dry. 

 

 

 

is lighting

 

• 

Empty the water container

 

 

• 

Make sure pour out condensate water. 

• 

If the light still on, please contact the service 

centre.

 

 

 

is lighting

 

• 

The lint filter is almost full.

 

• 

Make sure clean the lint filter all the time.

 

 

18

Summary of Contents for ED-H9151C

























Reviews: