background image

 

IMPORTANT SAFEGUARDS 

When  using  this  appliance,  basic  precautions  should  always  be  followed,  including  the 
following: 
 
1.

 

Read all instructions before using.

 

2.

 

Never leave the iron unattended when it is connected to the power. 

3.

 

Do not operate the iron with a damaged cord or if the iron has been dropped or 
damaged. To avoid the risk of electric shock, do not disassemble the iron on your own. 
Return the iron to the nearest authorized dealer or after-sales service centre for 
examination, repair or mechanical adjustment. Incorrect reassembly can cause a risk of 
electric shock when the iron is used. 

4.

 

To protect against a risk of electric shock, do not immerse the iron in water or any other 
liquids. 

5.

 

Never yank cord to disconnect from outlet instead, grasp plug and pull to disconnect. 

6.

 

Do not allow the power cord to touch hot surfaces. Let the iron cool down completely 
before putting away. Loop cord loosely around iron when storing. 

7.

 

Warning:

 The soleplate of the iron can become extremely hot right after use and may 

cause burns if touched. 

8.

 

Do not add chemical additive, scented substances or decalcifies into the water tank. 

9.

 

Always disconnect iron from electrical outlet when filling with water or emptying and 
when not in use. 

10.

 

This appliance is not intended for used by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliances by a 
person responsible for their safety. 

11.

 

Children should be supervised to ensure that they do not play with the iron. 

12.

 

Do not operate the iron for other than its intended use. 

13.

 

Do not use the iron outdoors. 

14.

 

Save these instructions for future reference. 

 
 
 

 

 

 
 
 
 
 
 
 
 
 

Summary of Contents for ESI-A2230S










Reviews: