4. OPERATION INSTRUCTION
4.1 Operate the whole unit
There are two buttons on the handle - power switch (1) and power regulation button (2)
(see Fig.4-1). Press the power switch (1), the motor starts to run, and the appliance
enters into high speed working mode. Press the power regulation button (2), the
appliance changes to the low speed working mode. Press the power regulation button
(2) again so that the appliance resumes working in high speed mode. Press the power
switch (1) if you want to turn off the appliance. During operation, please pay attention
to battery power level indicator (3), the indicator will extinguish gradually as the
battery power level reduces and the appliance will stop working automatically when
power level indicator extinguish.
Fig.
４
-
１
4.2 Operate the sub-unit (handheld unit)
Press the sub-unit release button (4) (see Fig.4.2), grasp the handle of sub-unit to
remove it by following the arrow shown, and then press the sub-unit switch (5) (see
Fig.4-3a), the sub-unit enters into working condition. Press the switch (5) again to turn
off the power.
If need to use small hair brush, please insert it into the suction nozzle of sub-unit by
following Fig. 4-3a/b. If need to use flat suction spout, insert it into the suction nozzle
of sub-unit by following Fig. 4-4a/b, and then activate it again.
２
3
