MonoWave(X) User Manual
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
3 of 26
Enhancements in the MonoWave(X) over the original MonoWave include:-
1) Reduction of interconnecting cables to 3 x 40-way IDC ribbon cables
2) Upgrading of the AT90S8515 to an ATMEGA16
3) Upgrading of the AT90S1200 to ATtiny2313
4) Expansion of LCD from 1x16 to a 2x16 line display
Development of a front panel support PCB to substantially improve the construction
process
Specifications
Power
Input: 15VDC @ 400mA
Audio out
Headphone socket: best if used with 32 ohms impedance
Monophonic 6.3 mm (1/4") socket
ROM waves
8-bit depth
256 samples per cycle
DE-REZ reduces cycle to 64 samples
ADSR timing range
Attack: 7mS to 6 Seconds
Decay: 7mS to greater than 20 Seconds
Release: 7mS to greater than 20 Seconds
Dynamic range
About 90dB
MIDI Note Range
C#-2 to C6
MIDI Note Offs
Recognises real Note Offs as well as velocity Note Offs
Size
2U 19” rack unit
Display
2 x 16 backlit LCD
All specifications are subject to change without notice.